版本: 0.5.1

Code Style

Introduction

This document gives the KCL code style conventions. Good code style can play a vital role in the development and maintenance of the project. We can learn the KCL code style by referring to the full text of the description and sample codes, and use KCL format and lint tools to help coding.

Source File Encoding

KCL file encoding should always use UTF-8.

Code Layout

Indentation

Use 4 spaces per indentation level such as in the schema statement and if statement.

schema PersonA:
  name: str  # non-recommended
  age: int

schema PersonB:
    name: str  # recommended
    age: int

if True:
    a = 1  # recommended
elif True:
  b = 2  # non-recommended
else:
      c = 3  # non-recommended

The closing brace/bracket/parenthesis on multiline constructs should line up under first character of the line that starts the multiline construct, as in:

# valid and recommended
my_list = [
    1, 2, 3,
    4, 5, 6,
]

# invalid
my_list = [
    1, 2, 3,
    4, 5, 6,
    ]

Tabs or Spaces

Spaces are the preferred indentation method.
Tabs should be used solely to remain consistent with code that is already indented with tabs.

KCL disallows mixing the use of tabs and spaces for indentation and an error will be reported during the compile time.

Blank Lines

Surround top-level schema definitions with one blank line.
Keep at most one blank line between two statements and remove redundant blank lines.
Remove extra blank characters at the end of the line
Remove extra blank characters in a blank line.
There is no blank line in the header of the file, start writing from the first line.
Only one blank line will be left at the end of the KCL file.

# Remove blank lines in the file header
a = 1  # Remove white space at the end of the line
# Keep at most one blank line between two statements

b = 2
# Only leave one blank line at the end of the file

Inline Expressions

Write indentation of KCL if, elif, else and other conditions on different lines.

if True: print("")  # non-recommended

if True:  # recommended
    print("")

Line Break and Continuation lines

For long expressions, use the line continuation symbol \ and keep the left end of multiple expressions aligned.
The 4-space rule is optional for continuation lines.

anotherString = "Too long expression " + \
            "Too long expression "  # non-recommended

longString = "Too long expression " + \
             "Too long expression " + \
             "Too long expression "  # recommended

When to Use Trailing Commas

Always use trailing commas.

Maximum Line Length

The general recommendation is 80 characters but not absolute.

Symbol Break White Space

Try to keep the spaces between different symbols, but not too many, usually one is good.

a = 1  # recommended
b    =    1    +   2  # non-recommended

Whitespace in Expressions and Statements

Avoid extraneous whitespace in the following situations:

The parentheses (), brackets [] and braces {} in the expression have no spaces inside.

a = (1 + 2)  # recommended
b = ( 1 + 2 )  # non-recommended

c = [1, 2, 3]  # recommended
d = [ 1, 2, 3 ]  # non-recommended

e = {key = "value"}  # recommended
f = { key = "value" }  # non-recommended

spam(ham[1], {eggs = 2})  # recommended
spam( ham[ 1 ], { eggs = 2 } )  # non-recommended

Between a trailing comma and a following close parenthesis.

foo = [0,]  # recommended
bar = [0, ]  # non-recommended

Immediately before the open parenthesis that starts the argument list of a function call.

print(1)  # recommended
print (1)  # non-recommended

Immediately before the open parenthesis that starts indexing or slicing.

dct = {key = "value"}
lst = [1, 2, 3]

a = dct['key']  # recommended
b = dct ['key']  # non-recommended

c = lst[0]  # recommended
d = lst [1]  # non-recommended

More than one space around an assignment = (or other) operator to align it with another.

# recommended:
x = 1
y = 2
long_variable = 3

# non-recommended:
x             = 1
y             = 2
long_variable = 3

Always surround these binary operators with a single space on either side: assignment (=), augmented assignment (+=, -=, etc.), comparisons (==, <, >, !=, <=, >=, in, not in, is, is not), booleans (and, or, not).

# recommended:
i = i + 1
submitted += 1
x = x * 2 - 1
hypot2 = x * x + y * y
c = (a + b) * (a - b)

# non-recommended:
i = i+1
submitted+=1
x = x*2 - 1
hypot2 = x*x + y*y
c = (a+b) * (a-b)

Break one blank line between different statements e.g., import, schema and expression statements.

import math
import net

schema Person:
    name: str

person = Person {
    name = "Alice"
}

Compound statements (multiple statements on the same line) are generally discouraged

# recommended:
if foo == 'blah':
    do_blah_thing()
do_one()
do_two()
do_three()

# non-recommended:
if foo == 'blah': do_blah_thing()
do_one(); do_two(); do_three()

Naming Conventions

Naming Styles

The following naming styles are commonly distinguished:

b (single lowercase letter)
B (single uppercase letter)
lowercase
lower_case_with_underscores
UPPERCASE
UPPER_CASE_WITH_UNDERSCORES
CapitalizedWords (capitalize all letters of the acronym in CapitalizedWords e.g., HTTPServer.)
mixedCase (differs from CapitalizedWords by initial lowercase character)
Capitalized_Words_With_Underscores (ugly and non-recommended)

Names to Avoid

Never use the characters 'l' (lowercase letter el), 'O' (uppercase letter oh), or 'I' (uppercase letter eye) as single-character variable names.

Package and Module Names

Package and module names should have short, all-lowercase names.

Schema Names

Schema names should normally use the CapWords convention.

Constants

Constants are usually defined on a module level and written in all capital letters with underscores separating words such as MAX_OVERFLOW and TOTAL.

Import

Imports should usually be on separate lines.
Imports are always put at the top of the file, just after any module comments and docstrings, and before module globals and constants.
Imports should be grouped in the following order and we should put a blank line between each group of imports.
1. Standard library imports.
2. Related third party plugin imports.
3. Local application/library specific imports.
Use an alias when we import a package name with a relatively long path.
Leave only one space between the Import keyword and the package name.

import net  # recommended
import    math  # non-recommended

import ..pkg.internal_pkg as alias_pkg  # recommended

Comments

Comments should be complete sentences. The first word should be capitalized unless it is an identifier that begins with a lower-case letter (never alter the case of identifiers!).
Block comments generally consist of one or more paragraphs built out of complete sentences, with each sentence ending in a period.
Use two spaces after a sentence-ending period in multi-sentence comments, except after the final sentence.

Block Comments

Block comments generally apply to some (or all) code that follows them, and are indented to the same level as that code. Each line of a block comment starts with a # and a single space(unless it is indented text inside the comment).

Paragraphs inside a block comment are separated by a line containing a single #.

# This is a block comment
a = 1

Inline Comments

Use inline comments sparingly.

An inline comment is a comment on the same line as a statement. Inline comments should be separated by at least two spaces from the statement. They should start with a # and a single space.

a = 1  # This is an inline comment

Documentation Strings

Write doc strings for all public schema and schema attributes.

schema Person:
    """
    Person schema doc string
    """

    name: str = "Alice"

String

Single-quoted strings and double-quoted strings are the same in KCL.
Use double-quoted string with lowercase prefix
For triple-quoted strings, always use double quote characters to be consistent with the docstring convention.
When a string contains single or double quote characters, use the other one to avoid backslashes in the string.

strC = "'123'"  # recommended
strD = "\"123\""  # non-recommended

Number

Use lowercase for the prefix of non-decimal numbers, and use uppercase for the number itself.

foo = 0xAB  # recommended
bar = 0Xab  # non-recommended

Operators

Binary Operators

Leave only one space before and after the assignment =.
Leave only one space before and after the binary operator in the expression.

a = 1  # recommended
b=2  # non-recommended
c= 3  # non-recommended
d =4  # non-recommended

_value = (1 + 2 * 3)  # recommended
_value = (1+2*3)  # non-recommended

Unary Operators

There is only no space after unary operators e.g., ~, + and -.

_value = 1 + -2 * ~3  # recommended
_value = 1+ - 2 * ~ 3  # non-recommended

There is no space after ** and * in the dict/list deduction expressions and argument expressions.

_list = [1, 2, 3]
_list = [*_list, [4, 5 ,6]]  # recommended
_list = [* _list, [4, 5 ,6]]  # non-recommended

_dict = {**{k = "v"}, **{k = "v"}}  # recommended
_dict = {** {k = "v"}, ** {k = "v"}}  # non-recommended

Use is not operator rather than not ... is.

# recommended:
if foo is not None:
    a = 1

# non-recommended:
if not foo is None:
    a = 1

Dict

There is no space before the colon : at the instantiation of KCL dict and schema config, and a space after the colon :.

d1 = {labels: {k1 = "v1"}}  # recommended
d2 = {labels : {k1 = "v1"}}  # non-recommended
d3 = {labels :{k1 = "v1"}}  # non-recommended

Always surround the override attribute operator = and the insert attribute operator += with a single space on either sid.

d1 = {key = "value"}  # recommended
d2 = {key= "value"}  # non-recommended
d3 = {key ="value"}  # non-recommended

d1 = {key += [0, 1, 2]}  # recommended
d2 = {key+= [0, 1, 2]}  # non-recommended
d3 = {key +=[0, 1, 2]}  # non-recommended

Remove all commas at the end of the line in the KCL multiline dict because the end commas of each line are optional.

d = {
    key1 = "value1"
    key2 = "value2"
    key3 = "value3"
    key4 = "value4"
}

List

Keep only one space after the comma , separating elements in the list

a = [1, 2, 3]  # recommended
b = [1,2,3]  # non-recommended

Keep only one space before and after the comprehension expression token for and in in the dict and list.

a = [i for i in range(10)]  # recommended
b = [i  for  i  in  range(10)]   # non-recommended

Slice

Keep the same number of spaces before and after the colon : of the list slice.

l = [1, 2, 3]
a = l[0:2]  # recommended
b = l[0 : 2]  # non-recommended
c = l[0: 2]  # non-recommended

d = l[0 + 0 : 1 + 1]  # recommended
e = l[0 + 0:1 + 1]  # non-recommended

Schema

Leave only one space before and after the schema attribute assignment =.
Always add a doc string to a schema, which is a good programming habit.

schema Person:
    """
    Schema doc string
    """
    name: str = "Alice"  # recommended
    age : int=12  # non-recommended

person = Person {}

Keep no spaces around the schema inheritance operator ()

schema Base:
    name: str

schema Person(Base):  # recommended
    age: int

schema Schema ( Base ):  # non-recommended
    age: int

Keep only one space between the brackets and the schema name of the config at schema instantiation.

schema Base:
    name: str

schema Person(Base):
    age: int

personA = Person{}  # non-recommended
personB = Person {}  # recommended

Keep only one space between the mixin keyword and the following [] operator

schema NameMixin:
    name: str = "name"

schema Person:
    mixin   [NameMixin]  # non-recommended
    age: int

schema Parent:
    mixin [NameMixin]  # recommended
    age: int

Attribute Annotations

Annotations for schema attributes should have a single space after the colon : and no space before the colon :.

# recommended:
schema Person:
    name: str  # No space before the colon `:`
    age: int = 18  # Spaces around assignment`=`

# non-recommended:
schema Person:
    codeA:int  # No space after the colon `:`
    codeB : int  # Space before the colon `:`
    name: str="Alice"  # No spaces around assignment`=`

There are no spaces around the colon : in the dict type annotation.

schema Person:
    labels: {str:str}  # recommended
    keyValues: {str : str}  # non-recommended

Arguments

There are no spaces around the assignment = in the function/schema/decorator keyword arguments (kwargs).

schema Person[nameVar]:
    # Decorator kwargs
    @deprecated(strict=False)  # recommended
    name: str = nameVar

    @deprecated(strict = False)  # non-recommended
    age: int

# Schema kwargs
personA = Person(nameVar="Alice") {}  # recommended
personB = Person(nameVar = "Bob") {}  # non-recommended

# Function kwargs
print("", end='')  # recommended
print("", end = '')  # non-recommended

Keywords

Only one space is usually reserved around the keyword, such as schema, mixin, is and not, etc.

schema NameMixin:
    check:
        name not None

schema Person:
    """
    Person schema definition
    """
    mixin [NameMixin]

    name: str = "Alice"
    age: int

person = Person {
    age = 18
}

Function

There are no spaces around the function/package select operator .
There are no spaces between the function name and the parentheses ().

import math

print(math.log(10))   # recommended
print( math . log (10))  # non-recommended

Introduction​

Source File Encoding​

Code Layout​

Indentation​

Tabs or Spaces​

Blank Lines​

Inline Expressions​

Line Break and Continuation lines​

When to Use Trailing Commas​

Maximum Line Length​

Symbol Break White Space​

Whitespace in Expressions and Statements​

Naming Conventions​

Naming Styles​

Names to Avoid​

Package and Module Names​

Schema Names​

Constants​

Import​

Comments​

Block Comments​

Inline Comments​

Documentation Strings​

String​

Number​

Operators​

Binary Operators​

Unary Operators​

Dict​

List​

Slice​

Schema​

Attribute Annotations​

Arguments​

Keywords​

Function​